Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-06 Rev. A
162
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Figure 5-32 Airport Information Page
Airport/Runway
Diagram
Navigation Map
Showing Selected
Airport
Runway Information
- Designation
- Length/Width/Surface
- Lighting Available
Airport Information
- ID/Facility/City
- Usage Type/Region
- Lat/Long/Elev
- Fuel Available
- Time Zone (UTC Offset)
COM/NAV Freq. Info.
- Identification
- Frequency
- Availability
- Additional Information
Softkeys
The following descriptions and abbreviations are used on the Airport Information Page:
• Usage type: Public, Military, or Private
• Runway surface type: Hard, Turf, Sealed, Gravel, Dirt, Soft, Unknown, or Water
• Runway lighting type: No Lights, Part Time, Full Time, Unknown, or PCL Freq (for pilot-controlled
lighting)
• COM Availability: TX (transmit only), RX (receive only), PT (part time), i (additional information available)
Selecting an airport for review by identifier, facility name, or location:
1)
From the Airport Information Page, press the
FMS
Knob.
2)
Use the
FMS
Knobs and enter an identifier, facility name, or location.
3)
Press the
ENT
Key.
4)
Press the
FMS
Knob to remove the cursor.
Selecting a runway:
1)
With the Airport Information Page displayed, press the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to place the cursor in the ‘RUNWAYS’ Box, on the runway designator.
3)
Turn the small
FMS
Knob to display the desired runway (if more than one) for the selected airport.
4)
To remove the flashing cursor, press the
FMS
Knob.
Содержание Diamond DA40
Страница 1: ...System Software 0321 20 or later G1000 Integrated Flight Deck Pilot s Guide...
Страница 2: ......
Страница 537: ......