Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-06 Rev. A
310
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
SELECTING THE STORMSCOPE PAGE
Stormscope lightning data can be displayed at the ranges of 25 nm, 50 nm, 100 nm, and 200 nm.
Adjusting the Stormscope Map Range:
1)
Turn the large
FMS
Knob to select the Map Page Group.
2)
Turn the small
FMS
Knob to select the Stormscope Page.
3)
To change the map range, turn the
RANGE
Knob clockwise to zoom out or counter-clockwise to zoom in.
Figure 6-50 Stormscope Page
Changing between ‘cell’ and ‘strike’ mode on the Stormscope Page:
1)
Select the Stormscope Page.
2)
Press the
MODE
Softkey. The
CELL
and
STRIKE
softkeys are displayed.
3)
Press the
CELL
Softkey to display ‘CELL’ data or press the
STRIKE
Softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box in the upper left corner of the Stormscope Page.
4)
Press the
BACK
Softkey to return to the main Stormscope page.
Changing the viewing mode between 360˚ and 120˚ on the Stormscope Page:
1)
Select the Stormscope Page.
2)
Press the
VIEW
Softkey. The
360
and
ARC
softkeys are displayed. Press the
360
Softkey to display a 360˚
viewing area or press the
ARC
Softkey to display a 120˚ viewing area.
3)
Press the
BACK
Softkey to return to the main Stormscope page.
Содержание Diamond DA40
Страница 1: ...System Software 0321 20 or later G1000 Integrated Flight Deck Pilot s Guide...
Страница 2: ......
Страница 537: ......