190-00592-06 Rev. A
Garmin G1000 Pilot’s Guide for Diamond DA40/40F
389
AUTOMATIC FLIGHT CONTROL SYSTEM
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
DEPARTURE
Climbing to the Selected Altitude and flying an assigned heading:
1)
Before takeoff, set the Selected Altitude to 12,000 feet using the
ALT
Knob.
2)
In this example, Vertical Speed Mode is used to capture the Selected Altitude (Pitch Hold, Vertical Speed, or
Flight Level Change Mode may be used).
a)
Press the
VS
Key to activate Vertical Speed Mode.
The Vertical Speed Reference may be adjusted after Vertical Speed Mode is selected using the
NOSE UP/
NOSE DN
Keys or pushing the
CWS
Button while hand-flying the aircraft to establish a new Vertical Speed
Reference.
b)
Press the
AP
Key to engage the autopilot in a climb using Vertical Speed Mode.
3)
Use the
HDG
Knob to set the Selected Heading, complying with ATC vectors to intercept Airway V4.
Press the
HDG
Key to activate Heading Select Mode while the autopilot is engaged in the climb. The autopilot
follows the Selected Heading Bug on the HSI and turns the aircraft to the desired heading.
4)
As the aircraft nears the Selected Altitude, the flight director transitions to Selected Altitude Capture Mode,
indicated by the green ‘ALTS’ annunciation flashing for up to 10 seconds.
At 50 feet from the Selected Altitude, the green ‘ALT’ annunciation flashes for up to 10 seconds; the autopilot
transitions to Altitude Hold Mode and levels the aircraft.
Содержание Diamond DA40
Страница 1: ...System Software 0321 20 or later G1000 Integrated Flight Deck Pilot s Guide...
Страница 2: ......
Страница 537: ......