Garmin aera 560, Руководство пилота

Страница: 184 / 230

Garmin aera 500 Series Pilot’s Guide 190-01117-02 Rev. C
Appendix D
168
Overview
GPS Navigation
Flight Planning
Hazar
d A
voidance
Additional F
eatur
es
Appendices
Index
GDL 39 SERIAL PASS-THROUGH
NOTE:
Serial Pass-Through is only available on a bare wire installation.
The GDL 39 is capable of passing serial data from the aera to an additional serial
device. The aera should be connected to channel A (Green, White/Green wires) on
the GDL 39. To utilize the serial pass-through capability of the GDL 39, connect
an additional serial device to GDL 39 channel B (Orange, White/Orange wires) and
configure the serial pass-through format on the aera. On the Interface Setup Page, the
following serial formats are available for GDL 39 Pass-Through:
• None
• NMEA Out
• Aviation In
• Aviation In/NMEA & VHF Out
• GTX TIS-A In
• GTX TIS-A In/NMEA & VHF Out
Scroll down on the Interface Setup Page to view additional settings for the NMEA
Output Mode (Normal/Fast) and/or the pass-through connection status.
Configuring aera and GDL 39 for Serial Pass-Through:
1) Connect the aera to the GDL 39 using a bare wire installation.
2)
From the
Main Menu
, touch
Tools
>
Setup
>
Interface
.
3) Touch the 'Serial Data Format' data field button. A vertical list is displayed.
4)
Touch '
Garmin Data Transfer'
. When recognized, the GDL 39 device and
connections information is shown.
5)
Touch the 'GDL 39 Pass-Through Serial Format' data field button. A vertical
list is displayed.
6)
Touch the desired data format ('
NMEA Out
', '
Aviation In
', '
Aviation In/
NMEA & VHF Out
', '
GTX TIS-A In
', '
GTX TIS-A In/NMEA & VHF Out
',
or '
None
').
7)
Scroll down to view additional settings for the NMEA Output Mode
(Normal/Fast) and/or the pass-through connection status.