Garlando ST5887, Руководство по сборке

Страница: 14 / 28

15
Picture2 Picture3 Picture4 Picture5
Picture6 Picture7 Picture8 Picture9
Picture10 Picture11 Picture12
2.
MANUAL ：
A.
In standby mode, with been RPM signal been transmitted, then QUICK START immediately, the buzzer beeps
at the same time.(picture 15~picture16)r
B.
Or in standby mode, press MODE KEY, MANUAL blinks(picture 14), then press MODE KEY to start
MANUAL function
， buzzer beeps for 1 minutes.
C.
LCD screen display MANUAL
，
TIME, DISTANCE, CALORIES, PULSE, SPM, WATT, TOTAL STROKES
and STROKES start to count according to operation value and display. CALORIES, PULSE, SPM, WATT,
TOTAL STROKES and STROKES will switch to display in every 5 seconds (picture 15~16)
。
D.
When start exercising,user don’t need to press any buttons, with no RPM signal and heart rate signal been
transmitted for 4 minutes , then buzzer beeps 0.5 second and enter into standby mode.
E.
When user is exercising, press MODE KEY, EXERCISE stop blinking, TIME,DISTANCE display current
exercise value. CALORIES, PULSE, TOTAL STROKES and STROKES switch display after 5 seconds,
PULSE display heart rate.(picture 17~18)
。
F.
When exercise stop and display STOP is blinking, press MODE KEY
，
electronic watch continues to perform