Garlando ST5887, Руководство по сборке

Страница: 16 / 28

17
Picture19 Picture20 Picture21 Picture22
D.
“REST 01/08”(picture 23)
，
buzzer beeps 0.5 second for each second, TIME start to count down from 20
to zero. TIME, DISTANCE, CALORIES, PULSE, SPM, WATT, TOTAL STROKES and STROKES start
to count according to operation value and display. CALORIES, PULSE, SPM, WATT, TOTAL STROKES
and STROKES will switch to display in every 5 seconds
，
in the last 3 seconds “READY” flash.(picture
24) 。
E.
C and D repeat cycle, each cycle count plus 1 until “WORK 08/08”exercise
，
then enter into finish
screen, buzzer beeps 0.5 second. (picture 15~16)
。
Picture23 Picture24 Picture25 Picture26
F.
When end the training, STOP flashes. TIME and DISTANCE display training value
，
CALORIES,
PULSE, TOTAL STROKES and STROKES switch to display in every 5 seconds
，
PULSE display heart
rate, press MODE KEY at the same time
，
you can also perform INTERVAL 10/20 function. In the
training finished screen, if user press RESET KEY ， electronic watch enter into standby, buzzer beeps 0.5
second. In the training finished screen, if user don’t press any buttons or finish training after 4 minutes,
electronic watch enter into standby, buzzer beeps 0.5 second.
G.
During exercise, press MODE KEY, exercise stop and STOP flashes, TIME, DISTANCE display current
exercise value
， CALORIES, PULSE, TOTAL STROKES and STROKES switch to display current