Garlando ST5887, Руководство по сборке

Страница: 20 / 28

21
Picture37 picture38 picture39
picture40 picture41
I.
After end the exercise (picture 40~41)
，
the screen display STOP is flashing. TIME, DISTANCE display
the finished value. CALORIES, PULSE, TOTAL STROKES and STROKES switch to display exercise
value when to be 5 second, PULSE display heart rate, press MODE KEY, at the same time
，
then user can
perform INTERVAL CUSTOM function again
；
In stop state, press RESET KEY
，
electronic watch enter
into standby, buzzer beeps 0.5 second
；
In STOP state, if user don’t press any buttons or after finished
training for 4 minutes, electronic watch enter into standby, buzzer beeps 0.5 second.
J.
When user is exercising , press MODE KEY ， exercise stop and display STOP is flashing. TIME,
DISTANCE display the current exercise value. CALORIES, PULSE, TOTAL STROKES and STROKES
switch to display current exercise value when it to be 5 second. PULSE display heart rate, press MODE
KEY at the same time
，
electronic watch continue to perform exercise screen, if press RESET KEY
，
electronic watch enter into standby. In STOP state, if user don’t press any buttons or after finished training
for 4 minutes, electronic watch enter into standby.
K.
When WORK start to work, user don’t press any buttons , with no RPM signal and heart rate been
transmit for 4 minutes, buzzer beeps 0.5 second and enter into standby.
4.
TARGET ：
IN standby mode, press “MODE” KEY, at the same time press”SET” key switch to choose “TARGET” function
，
LCD flashing display”TARGET” (picture42)
。