Garland MASTER SERIES XG24CE GB/IE, Руководство по установке и эксплуатации

Страница: 11 / 32

Part # 4517127 (06/23/08) Page 11
GRILL CONTROLS continued
Power Button:
After the main power switch is turned on, this button will put
the control into cook mode. If pressed again, the control will
go back to displaying “OFF.”
Program Button:
The primary function is to access Programming and
Calibration of the grill. Push and hold for five (5) seconds.
Display will ask for the code. After entering code, four
programming features will be accessible “MENU ITEMS,”
“SYSTEM INFO,” “SYSTEM SETUP,” and “SERVICE MODE.”
Temperature Button:
In the Cook mode, each time the button is pressed the
current temperature for one zone will be displayed. The
grill temperature is displayed first followed by the platen
temperature. After five (5) seconds, the display will return to
the menu item selected.
Up/Down Arrow Buttons; 2 Functions:
1. In the cook mode, the Up/Down Arrow Buttons will cycle
through the different menu items.
2. In the program mode, the Up/Down Arrow Buttons will
change the value of the current setting.
Enter Button:
Function is to accept programming steps.
Cancel/Raise Platen Button, (Green):
During the cooking cycle, pressing this button will cancel the
cooking timer and return the grill to the “IDLE” mode. This
button will also bring the grill out of STANDBY.
Black Button:
When both Black and Green “CANCEL/RAISE” buttons are
pressed simultaneously, the upper platen will lower to the
griddle surface.
OPERATION
Installing Release Material:
Slide release material rod through hemmed end of the
release material sheet.
Hook release material rod on brackets located at the rear of
the upper plate.
UPPER PLATEN (side view)
RELEASE MATERIAL HOOK
RELEASE MATERIAL SHEET
RELEASE
MATERIAL ROD
REAR OF GRILL