USER GUIDE
EdgeSafe Bypass | M100G1xx
9.7.2 RADIUS
The M100G1AC supports RADIUS/ remote login. RADIUS and cannot be enabled at the
same
time. To enable either, the other needs to be disabled first.
RADIUS users share the same privilege level, which can be configured through Web or CLI.
Navigate to User > RADIUS to access the RADIUS configuration page, as shown:
In the Global area, the user can configure the following:
Enable: Enable RADIUS remote login.
User Privilege: Set the user privilege.
Retry: Specify how many times to re-send a packet when there is no response from the server.
Local Login: Enable local users’ login.
In the Server area, the user can configure RADIUS server settings, including IP, Port, Secret
(encrypt/decrypt packets sent/received from the server) and Timeout (value in seconds).
For more information, refer to 4. System management overview.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
78