USER GUIDE
EdgeSafe Bypass | M100G1xx
9.5.1.2 Advanced Features
The following screenshot shows the Advanced Features menu for module configuration.
On the Advanced Features menu, the user can configure the following:
Two Port Link
Enable or disable the 2PL feature. See 5.4.1 Two-port Link for reference.
M2N
Enable or disable the M2N feature. See 5.4.2 M2N for reference.
M2M
Enable or disable the M2M feature. See Figure 15 M2M for reference.
Device Power Off Mode
The M100G1AC supports Disconnect or Bypass (default) mode at system power-off.
-
When Disconnect is selected, in any event of power-off, the M100G1AC will go into Disconnect
mode -
- simulating switch/router cable disconnection on the two network ports.
- When Bypass is selected, in any event of power-off, the M100G1AC will go into Bypass mode.
This is the default mode.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
65