Garland M100G1AC Скачать руководство пользователя страница 53

Страница: 53 / 89

USER GUIDE

EdgeSafe Bypass | M100G1xx

The following users will not be able to control the Web interface, and they will only be able to monitor the
M100G1xx parameters.

When the ﬁrst user logs oﬀ from the Web interface, the next user will inherit the ﬁrst user’s rights and will
be able to control and monitor the Web interface.

After login, the main menu of the M100G1xx Web interface is displayed, which contains the following tabs:

Each tab will be explained in subsequent sections.

9.3 Status
The Status tab provides access to the following status information pages:

System

Module (Module 1 and Module 2)

SNMP

Session

System Log

9.3.1 System status
Navigate to Status > System. The system information page is displayed, showing status of the following:

Global

Sensors (I2C sensors, BCM sensors, Switch sensors, Module sensors)

Fans

Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.

Содержание M100G1AC
























































































Результаты поиска

Содержание M100G1AC

Отзывы:

Garland M100G1AC, Руководство пользователя, Страница: 53 / 89

Результаты поиска

Содержание M100G1AC

Отзывы: