Installation
RTCSmp Built-In Temperature Controlled Hold-Line
14
Part # 4532287 Rev 2 (1/20/14)
4.5
Electrical Installation
IMPORTANT
•
Refer to the electrical specifications in chapter
3 Dimensions and Technical Specifications
AND the
markings/instruction labels on the unit
. If the information differs between the data listed in the
manual and the markings on the unit, always follow the markings on the unit.
•
Check and ensure that the supply voltage and the line current match the specifications given on the
rating plate. A stable mains supply must be provided.
CAUTION
Wrong voltage will damage the induction unit. Follow strictly
the specifications on the rating plate.
•
The electrical connections must satisfy the national and local electrical codes.
•
If ground fault current protective switches are used, they must be provided with selective activation and
designed for a minimum fault current of 30mA. Multiple generators with a mains connection must not be
connected to a single fault current protective switch.
To setup the unit for operation:
1.
Ensure the control knob is at the OFF-Position.
ON-Position
Any position where
“0”/Line is not pointing
straight up.
OFF-Position
“0” / Line is pointing
straight up.
2.
Remove all objects from the glass cook-top and check that the glass cook-top is neither cracked nor
broken.
CAUTION
Do not continue if the glass cook-top is cracked or broken.
Contact an authorized service agency for assistance.