![background image](http://html.mh-extra.com/html/garland/giraffe-312-g/giraffe-312-g_instruction-manual_564489043.webp)
English
English
43/174
6.3. BAR AND CHAIN INSTALLATION
ATTENTION! Do not forget to always wear safety
gloves when handling the chain to avoid accidentally
cutting yourself. The mower chain has very sharp
teeth.
ATTENTION! : Never touch, adjust or sharpen the
chain while the engine is running. Unplug the machine
before handling the chain.
Never start the machine before installing chain,
bar, chain cover and chain cover nut.
Without these pieces there may be a risk of personal
injury.
The chain bar and chain are supplied separately. To
install them follow the following steps:
1. Unscrew the nut from the chain cover (1).
2. Remove the chain cover (2).
3. Place the chain on the bar.
Before mounting the guide bar with the chain, check
the cutting direction of the teeth. The direction of
rotation
It is marked on the machine, under the
attack pinion (A).
The correct position of the chain will have the cutting
edges of the teeth in the direction of rotation of the
chain:
4. Monte la barra con la cadena instalada insertando
el perno de tensado en el orificio de la barra (B) y
colocando la cadena alrededor del piñón de ataque.
5. Place the chain cover ensuring that the tensioning
bolt continues in the hole in the bar.
6. Place the cap nut and lightly tighten with your
fingers.
7. Tighten the chain, to do this turn the chain
tensioning screw clockwise to tighten or
counterclockwise to loosen the chain until the chain
tension is correct. (More information in point 6.3.1).
1
2
Cutting teeth direction
A
B
Содержание GIRAFFE 312 G
Страница 31: ...Español 31 174 NOTAS ...
Страница 142: ...Português 142 174 NOTES ...
Страница 144: ......