![background image](http://html.mh-extra.com/html/garland/giraffe-312-g/giraffe-312-g_instruction-manual_564489049.webp)
English
English
49/174
7.1.3. CUT WITH THE PRUNER
We recommend that you train with small branches
in an easy position to gain experience before
undertaking more complicated cuts.
Always follow the safety rules indicated in this manual.
Use this machine exclusively for cutting wood. It is
forbidden to cut any other type of material.
Do not use this machine to move objects.
While cutting, use the machine gently. Only lightly
press down while keeping the machine at full power.
The machine’s own weight will be sufficient to make
the cut. If the chain is locked, do not attempt to pull
the machine while it is running. Stop the mower and
use a wedge to release the mower.
7.1.4 CUTTING A BRANCH OF A TREE
To cut a branch of a tree that
does not touch the ground
always start with a cut of ¼
of the diameter of the branch
from below (1) and then cut
the rest from above (2).
In this way you will facilitate the opening of the cut
and that the branch is broken by damaging the tree.
Cut the long branches into several pieces starting
from the outside of the branch (part furthest from the
center of the tree).
If you have to cut different branches of a tree, first cut
the low branches so that they leave room to access
the high branches.
Recommendation: It is convenient not to make the last
cut with the weight of the branch. It is recommended
to cut the branch and leave for the final one last cut
“end cut” (3). Between the last “normal” cut and the
“end cut” there must be a distance of 5-10 cm. The
end cutting will be done from top to bottom slowly to
prevent the wood from cracking.
8. MAINTENANCE AND SERVICE
Make periodic inspections of the machine to ensure
that the machine is correct. For a thorough inspection
take the machine to your dealer.
It is necessary to stop the engine and to check
that the cutting tool is stopped before cleaning or
transporting the machine.
Before performing any maintenance or repair the
machine make sure the engine is off and remove
the spark plug cap. Perform all maintenance of the
machine when is set on a flat and clear surface.
Never try adjustments in the machine if it is running
and / or attache to the user by the harness. Perform
all maintenance of the machine when is set on a flat
and clear surface.
Warning! Do not modify the machine or change
the cutting elements. An inadequate use of these
elements can cause serious personal damages and
can even be fatal.
Use only suitable spares to get a proper performance
for this machine. This replacement can be found on
the official distributor of the machine. Using other
sparks may causes risks, damage to the user or
people around the machine.
Carburetor adjustment is complicated and should
be done only by the service.Carburetor regulation
is complicated and should only be carried out by a
Содержание GIRAFFE 312 G
Страница 31: ...Español 31 174 NOTAS ...
Страница 142: ...Português 142 174 NOTES ...
Страница 144: ......