![background image](http://html1.mh-extra.com/html/garland/convection-microwave-oven/convection-microwave-oven_installation-and-operation-instructions-manual_3712886012.webp)
Part # 1955203 (12/06)
Page 12
To set the oven temperature, press the
SET
key again.
The
TEMP
LED will light and the oven temperature
can be set by rotating the dial on the controller until the
desired temperature is displayed. Pressing the
SET
key
again will light the
HOLD
LED allowing the operator
to set the hold temperature in the same manner.
NOTE: If the hold temperature is not set, the default
hold temperature is °F (°C) or the last programmed
temperature. (Hold temperature range is °F (°C)
to °F (°C).
When the core temperature is reached the display will
sound and flash “
DONE
” for seconds. Automatically,
the display will switch to count “
UP
” the time the oven
is on hold.
Setting Setback Feature
To set or change the setback settings, press and hold
the
SETBACK
key for two seconds. The
TEMP
LED
will light and a temperature will be displayed. Set the
temperature using the dial, then press the
SET
key. The
TEMP
LED will go out and the
TIME
LED will light
(“Time” is factory set at ). Set the time using the dial,
then press the
SET
key. Press the
SET
key one more
time to exit programming.
NOTE: To disable the setback function, set the time
to zero.
Master 475 Electronic
Programmable Control
Manual Cooking
1. Press
SET
key –
TEMP
LED will light.
2. Set temperature using the dial (factory preset at
350°F).
3. Press
SET
key –
FAN
LED will light.
4. Select fan mode using one of the three (3) fan keys
(
HIGH, LOW, PULSE
) – the selected
FAN
LED
will light.
5. Press
SET
key –
TIME
LED will light.
OPERATING INSTRUCTIONS Continued
Содержание Convection Microwave Oven
Страница 2: ...Part 1955203 12 06 Page 2...
Страница 21: ......
Страница 22: ......
Страница 43: ...Pi ce n 1955203 12 06 Page 2...