Gardsman IC2020, Руководство пользователя

Страница: 18 / 35

15
Command 41
Auto Answer for Remote Programming
z
IC2020 can be programmed to auto answer
incoming phone calls after a pre-set
number of rings have been reached. The
number of rings ranges from (
00 ) (no auto
answer) to ( 32 ) rings.
Function Selection Result
(00) OFF
(01) - (32) ON
z
Factory Default is as ( 20 ) Rings.
<
<
N
N
O
O
T
T
E
E
>
>
)
If 00 is selected, it means the IC2020
cannot auto-answer the call by ring
count. If you want to do Remote
programming, please follow the
Remote Programming method
described under
System Conifuration,
I. Entering Programming Mode: 2.
Remote Programming Mode.
Command 42
Guard Time Delay
z
IC2020 can be programmed to delay alarm
reporting from ( 00 ) (instant reporting) to
( 99 ) seconds.
z
During this time period, a voice prompt “ Bi-
Bi-Bi Emergency ”, will be played twice to
alert user at a rate of approximately once
per 3 sec.
z
If a false alarm is triggered, it can be
cancelled within the Guard Time Delay.
Function
Selection
Result
(00) INSTANT REPORTING
(01) - (99) DELAY
z
Factory Default is set as ( 05 ), 5 SEC .
< < N N O O T T E E > >
)
The Emergency alarm cannot be
cancelled after the Guard Time is
elapsed.
Command 43
Periodic Test Call
z
IC2020 can be programmed to make test
calls periodically from (00) (no test call) to
every (1) - (7) or 30 days:
Function Selection Result
(0) OFF
(1) - (7) 1 - 7 DAYS
(8) 30 DAYS
z
Factory Default is set as ( 5 ), 5 DAYS .
Command 44
Mobility Timer
This function monitors user movement around
the premises and sends an inactivity report to
the Monitoring Center if the user fails to reset
the inactivity timer.
z
This will disable or enable the Inactivity
Timer with selectable count down periods.
Options are:
Function
Selection
Result
(0) DISABLE
(1) 12HR
(2) 24HR
z
Factory Default is set as ( 0 ), DISABLE .
<
<
N
N
O
O
T
T
E
E
>
>
)
The Mobility Timer counting down can
be reset by:
1. Pressing the NURSE button on
IC2020, or,
2. Movement detected by PIR
Detector