English
– 135
TECHNICAL DATA
Note 1: The power rating of the engine indicated is the aver
age net output (at specified
rpm) of a typical production engine for the engine model
measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on
the final machine will depend on the ope
rating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard deviation)
of 1.2 dB(A).
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s
2
(steering wheel) and 0.8 m/s
2
(seat).
G125-85F
Dimensions
Length with cutting unit, mm/ft
2057 / 6,75
Width with cutting unit, mm/ft
1029 / 3,38
Height, cm/in
107 / 42
Machine with empty tanks, kg/lb
190 / 419
Wheel base, mm/ft
800/2.62
Tyre size, front
16*6-10
Tyre size, back
13*5-8
Air pressure, rear - front, kPa / bar / PSI
80/0,8/11,6
Engine
Brand / Model
Briggs & Stratton / 3125
Nominal engine output, kW (see note 1)
6,5
Displacement, cm
3
/cu.in
344/21
Max.motor speed, r/min
2900
±
100
Fuel, minimum octane grade lead-free
85
Fuel tank capacity, litre
3,3
Oil, class SJ-CF
SAE 5W/30 or SAE 10W/30
Oil tank capacity, litre/USqt
1,4/1,5
Starting
Electric starter
Electrical system
Type
12 V, negative earthed
Battery
12 V, 18 Ah
Spark plug
Champion QC12YC
Electrode gap, mm/inch
0,75/0,030
Main fuse
Flat pin, 15 A.
Noise emissions and cutting width
(see note 2)
Sound power level, measured dB(A)
98
Sound power level, guaranteed dB(A)
99
Cutting width, cm/inch
85/33,5
Sound levels
(see note 3)
Sound pressure level at the operators ear, dB(A)
83
Vibration levels
(see note 4)
Vibration level on the steering wheel, m/s
2
1,6
Vibration level in the seat, m/s
2
0,9
Transmission
Brand
Topec T7000
Lubricant
SAE 80W-90
Number of forward gears
3
Number of reverse gears
1
Forward speed, km/h.
0-8
Reverse speed, km/h
0-4
Cutting unit
Type
Mulching
Cutting heights, 5 positions, mm/inch
25-70 / 1-2 3/4
Blade
Article number
5810835-01
Blade length, mm/inch
491 / 19,33
IMPORTANT! When the service life of this product has been served and it is no longer used it should be returned to the dealer or to an applicable
station for recycling.
IMPORTANT! We reserve the right to change
specifications
and designs without prior notice so as to implement improvements. Note that no legal
claims are valid on the basis of information in this manual. Use only genuine parts for repairs. The warranty is not valid if non genuine parts are
used.
