Gardner Denver Thomas 2660AT32-492W, Руководство по обслуживанию на месте

Страница: 15 / 24

15
Lead Side
1. If you are replacing a flapper valve on the
bottom side of the valve plate (side facing the
compressor housing), remove the flapper valve
screw (1) with a 1/4" hex socket, lift off the
valve keeper strip (2), and lift off the flapper
valve (3).
1
2
3
Port 1
Port 2
2. Clean any debris with a soft, damp cloth. Turn
the compressor head upside down and place
the valve plate on the compressor head and
orient it as illustrated. Note the position of the
valve ports and the location of the power leads
on the compressor housing.
3. Orient a flapper valve (1) over Port 2. Observe
the location of the notches (2) at the end of the
flapper valve.
Lead Side
2
1
Tab indicates
exhaust side