12
Component Repair
Servicing the Head, Valve Plate
Assembly and Connecting Rod and
Bearing Assembly
The head would only need to be replaced if it is
visibly damaged.
Component Parts Required
You will need:
Head (if damaged)
Head gasket O-ring
Valve plate O-ring
Complete valve plate assembly or individual
flapper valves.
Flapper valve screw(s) if replacing individual
flapper valve(s).
Removing the Head
1. Disconnect the power.
2. Disconnect all air lines and remove
compressor from the enclosure.
3. Remove all screws (1) that fasten the head
(2) to the compressor housing.
4. Carefully separate the head from the
compressor body.
5. Carefully separate the valve plate
assemblies (4) from the heads.
6. Remove the head gasket O-rings (3) and
replace.
7. Turn the valve plates over and replace the
valve plate gasket O-rings (5).
Attention
If you are replacing the head and
gaskets only, see the assembly
instructions on page 20. To replace
the valve flappers and connecting rod
assembly, continue to page 13.
1
2
3
4
5
Содержание Thomas 2660AT32-492W
