background image

ROTARY SCREW AIR COMPRESSOR

OPERATOR’S MANUAL & PARTS LIST

P/N: 090058-OP_r0

Effective Date:

August-2014

NOTE

Use only Vanair Vanguard™ 

Premium Synthetic Oil and 

Genuine Vanair Parts. Inspect 

and replace damaged 

components before operation. 

Substituting non-Vanguard™ 

Oil or non-genuine Vanair filter 

components WILL VOID THE 
COMPRESSOR WARRANTY! 

Vanair Manufacturing, Inc.

10896 West 300 North

Michigan City, IN 46360

Phone: (219) 879-5100

            (800) 526-8817

Service Fax: (219) 879-5335

Parts Fax: (219) 879-5340

Sales Fax: (219) 879-5800

www.vanair.com

KEEP THE MANUAL

WITH THE VEHICLE

Read this manual before 

installing, operating or 

servicing this equipment. 

Failure to comply with the 

operation and maintenance 

instructions in this manual 

WILL VOID THE EQUIPMENT 

WARRANTY.

NOTE

Making unauthorized 

modifications to the system 

components WILL VOID THE 

WARRANTY!

Always inform Vanair 

Manufacturing, Inc., before 

beginning any changes to the 

Viper Diesel system.

NOTE

This publication contains the 

latest information available at 
the time of preparation. Every 

effort has been made to ensure 

accuracy. However, Vanair 

Manufacturing, Inc. takes no 

responsibility for errors or 

consequential damages 

caused by reliance on the 

information contained herein.

Vanair Manufacturing, Inc. 
reserves the right to make 

design change modifications 

or improvements without prior 

notification.

©2014 Vanair Manufacturing, Inc.

All rights reserved.

Summary of Contents for Viper Series








































































Reviews: