Gardner Denver Thomas 2660AT32-492W, Руководство по обслуживанию на месте

Страница: 13 / 24

13
1
2
3 4
Opposite Lead Side
1
2
Port 1
Removing the Flapper Valves
Note: We recommend you remove and replace
one flapper valve at a time. This will help to
simplify the repair process and orient the
flapper valve correctly on the valve plate.
1. If you are replacing a flapper valve on the t o p
side of the valve plate (side facing the head),
remove the flapper valve screw (1) with a 1/4"
hex socket, lift off the valve keeper strip (2), lift
off the valve restraint (3), and lift off the flapper
valve (4).
2. Remove any debris from the valve plate with
a damp, lint free cloth. (Soaps and detergeants
should not be used due to the potential for
corrosion from soap residue.)
3. Place the valve plate on the compressor housing
and orient it as illustrated. Note the orientation
of the valve ports.
4. Orient a new flapper valve (1) over Port 1.
Observe the location of the notches (2) at the
end of the flapper valve.2. Orient a flapper
valve (1) over Port 1. Observe the location of
the notches (2) at the end of the flapper valve 2.
Orient a flapper valve (1) over Port 1. Observe
the location of the notches (2) at the end of the
flapper valve.
Tab indicates
exhaust side