background image

5

Safety First

It is recommended that you thoroughly read and understand this manual before you attempt to 
service the Thomas series of compressors to which this applies.  

PLEASE NOTE THE FOLLOW-

ING CAUTIONS AND WARNINGS FOR YOUR OWN SAFETY.

 

CAUTION

To avoid personal injury and/or property damage, only authorized service personnel should 

service this unit.

 

WARNING

To avoid the risk of electrical shock, personal injury, or death, disconnect power before 

servicing this unit.

 

CAUTION

To avoid personal injury, do not remove fan guards while unit is connected to power.

 

CAUTION

To avoid personal injury, especially to eyes and face, use eye and face protection when 

servicing this unit.

 

CAUTION

To avoid personal injury, especially to eyes and face, never point the exhaust air  flow at 

yourself or other people in the area. Unit is capable of pressures of very high pressures.

 

CAUTION

To avoid damage, never lubricate any component in your compressor.   All moving parts 

are permanently lubricated.

 

CAUTION

To avoid property damage or personal injury, always try rotating the fan by HAND  prior to 

connecting the unit to the power source.  Check for suction at the air inlet port by placing 

your finger over the port as you turn the fan. You should feel a slight suction with each 

rotation of the fan.  If you don't feel suction, or if you feel or hear a thump as you turn the 

fan,  DO  NOT  CONNECT  THE  UNIT  TO  A  POWER  SOURCE.    Review  the  assembly 

procedure for possible error.

Содержание Thomas 2660AT32-492W

























Отзывы: