Gardner Denver Elmo Rietschle G Series, Руководство по эксплуатации

Страница: 17 / 44

Product identification
3
© Gardner Denver Deutschland GmbH
17 / 44
08.2019 · 610.44434.40.000
EC/EU declaration of conformity
Manufacturer: Gardner Denver Deutschland GmbH
Industriestraße 26, 97616 Bad Neustadt, Germany
Representative for the
compilation of technical
documents: Holger Krause, Gardner Denver Deutschland GmbH
Industriestraße 26, 97616 Bad Neustadt, Germany
Designation of the ma-
chine: Compressor/vacuum pump
Series G-BH1 | G-BH9
Types 2BH11 | 2BH12 | 2BH13 | 2BH14 | 2BH15 |
2BH16 | 2BH18 | 2BH19 | 2BH923
The manufacturer bears sole responsibility for issuing this declaration of compliance. The machine
described above complies with all applicable harmonisation legislation of the Community:
2006/42/EC,
OJ L 157, 9.6.2006 Directive 2006/42/EC of the European Parliament and of the Council of 17
May 2006 on machinery, and amending Directive 95/16/EC
2014/30/EU *,
OJ L 96, 29.3.2014 Directive 2014/30/EU of the European Parliament and the Council of 26
February 2014 on the harmonisation of the laws of the Member States relat-
ing to electromagnetic compatibility
* Only with integrated drive control 2FC4
2011/65/EU,
OJ L 174, 1.7.2011
Directive 2011/65/EU of the European Parliament and of the Council of 8th
June 2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment
(taking into account all delegated acts/directives including 2015/863)
harmonised standards and other technical specifications on which the declaration of compliance is
based:
EN 1012-1:2010 Compressors and vacuum pumps - Safety requirements - Part 1: Compres-
sors
EN 1012-2:1996 +A1:2009 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum
pumps
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and
risk reduction (ISO 12100:2010)
EN 60204-1:2006/ A1:2009/
AC:2010
Safety of machinery; electrical equipment for machinery part 1: General
requirements IEC 60204-1:2005 (amended)
EN 60034-1:2010/ AC:2010 Rotating electrical machines - Part 1: Rating and performance IEC 60034-
1:2010 (amended)
Signed for and on behalf of: Gardner Denver Deutschland GmbH
Bad Neustadt, 09.08.2019
(Place and date of issue)
664.44434.40.000
3.7