Gardner Denver Elmo Rietschle G Series, Руководство по эксплуатации

Страница: 23 / 44

Installation
5
© Gardner Denver Deutschland GmbH
23 / 44
08.2019 · 610.44434.40.000
Fit loose silencer
!
The silencers are enclosed separately for two-stage and twin-flow G-BH1 | G-
BH9 and have to be installed.

Remove transport protection.
2BH1/9 (without 2BH1810)
1. Check that the seal (0433) is securely fastened to the silencer (0990) and re-
position seal, if necessary.
2. Position the silencer on the compressor cover or centre body
 Observe the alignment of the silencer!
3. Screw in the silencer using the screws (0444).
 M6: 7.5 – 9.0 Nm (5.55 – 6.65 ft lbs)
 M8: 18 – 22 Nm (13.3 – 16.2 ft lbs)
2BH1810 with manifold (0047)
1. Check that the seal (0054) is securely fastened to the silencer (0990) and re-
position seal, if necessary.
2. Position silencer on centre body with attached flange.
 Observe the alignment of the silencer!
3. Screw in the silencer using the threaded rods (0050) and screws (0051).
 M8: 18 – 22 Nm (13.3 – 16.2 ft lbs)
2BH1810 with double nipple (0447)

Screw the silencer (0990) with double nipple into the flange (0448).
 40 – 70 Nm (30.0 – 51.5 ft lbs)
Mount the accessories

Mount accessories according the instruction manual supplied with the re-
spective accessory.
5.5
5.6