![background image](http://html1.mh-extra.com/html/gardner-denver/airsmart-g2/airsmart-g2_installation-manual_3563037018.webp)
13-17-615 Page 17
Figure 2-4 - Changing Operating Mode
6. Exit to the main menu using the back soft key.
7. While at the home screen press the stop button
to reload I/O Mapping to apply the new
configuration. The mode “Sequenced” should be displayed above the machine hours timer.
Figure 2-5 - Sequenced Home Screen
Now that sequencing is enabled the correct settings need to be entered to for sequencing to work properly.
1. Press the menu button
soft key while at the home screen to enter the settings menu.
2. If the distributor level password has not been entered, press the unlock button
soft key and
enter a distributor level or higher password using the onscreen number pad.
3. Navigate to and select
Machine Configuration
.
4. Navigate to and select
Multi-Machine Sequencing
.
5. Select
Unit Number
and enter the desired unit number.
Note:
The unit number must be unique
to each unit in the sequence. Multiple machines cannot share the same unit number.
6. The remaining parameters must be the same across all machines in the sequence. These
parameters should be left at their default values, but may be adjusted to optimize machine
performance by experienced personnel.