Layout/Scope of delivery
HTW250/240P
10
AFTER SALES SUPPORT
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
2. Remove the spark plug (F) using the supplied spark plug spanner (19).
The spark gap must be 0.6 to 0.7 mm.
(Fig. 9)
Clean the spark plug when it is contaminated.
Replace the spark plug:
• once a month if the device is often used
• when the insulating body is damaged,
• when the electrodes show excessive erosion,
• when the electrodes show excessive dirt or oil.
Checking the hand guard (Fig. 1)
Check before each use, if the hand guard (2) is correctly fixed. Use the allen key
5mm (18) and the hexagon wrench (16) to tighten the hand guard (2).
Care
Clean the hedge trimmer thoroughly after each application.
Wear protective gloves when cleaning the cutting device.
• Clean the case with a soft brush or a dry cloth. Water, solvents and polishing
agents should not be applied.
• Check that the ventilation slots for the motor cooling are free (risk of overheating).
• Clean the cutting device on a regular basis using a brush or a cloth. Never clean
the knives with water (Risk of corrosion!)
• Clean and oil all moving parts regularly.
• Never use any grease!
• Use for instance environmentally acceptable spray oil.
Maintenance schedule
Operation - Maintenance interval
Adjust the cutting device if required
Adjust the idle speed if required
Tighten the silencer screws if required
Clean/replace the fuel filter if required
Clean/replace the air filter every 8 hours of operation
(more frequent in case of dusty environments)
Lubricate the gearbox every 20 hours of operation, at least once in a year
AUS
Maintenance, cleaning and servicing
HTH250/240P
26
AFTER SALES SUPPORT
1300 855 831
MODEL: HTH250/240P PRODUCT CODE: 59823 03/2018
