Layout/Scope of delivery
HTW250/240P
10
AFTER SALES SUPPORT
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
Adjustments on the hedge trimmer
Adjusting the rear handle. (Fig. 1)
To make working with the hedge trimmer easier it is possible to choose one of the 3
working positions of the rear handle (15).
• When adjusting the throttle trigger (14) can not be pressed.
1. Use your left hand to hold the hedge trimmer on its front handhold (3).
2. Pull the slider (13) and turn the rear handle (15) to your desired position.
3. Release the slider (13). Make sure that the unlocking device engages again and
that the rear handle (15) is secured.
VIII. WORKING INSTRUCTIONS
Carry out the following checks before starting and regularly during working with the
hedge trimmer:
• Is the hedge trimmer assembled completely and properly? Check also that all nuts
and screws are tightened. Screws on the cutting device: See 'Maintenance'.
• Is the hedge trimmer in good and safe condition? Do all safety devices properly
work?
• Is the fuel tank filled?
• Is the cutting device undamaged and sharpened?
• Are engine and silencer free from deposits, leaves or emerging lubricants.
• Is handhold clean and dry – free of oil, grease and resin?
• Is workplace free of risks to stumble?
• Do you wear the required protective equipment?
• Did you read and understand all advices?
• Is the throttle trigger easy-running and functioning?
• Does the ON/OFF switch properly work?
• Does the cutting device always stop in idle mode?
If the cutting device moves during idling the idle speed must be reduced
(see 'Adjusting the idle speed').
• Check that the gearbox is sufficiently lubricated (see 'Maintenance').
General behaviour when working with the hedge trimmer
• Never work alone. Another person should stay close enough to hear calls for help.
• Keep children, bystanders and animals at a distance (15m min.) from your working
AUS
Attachment and operation/Working instructions
HTH250/240P
20
AFTER SALES SUPPORT
1300 855 831
MODEL: HTH250/240P PRODUCT CODE: 59823 03/2018
