HTW250/240P
Introduction
AFTER SALES SUPPORT
9
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
area.
• Do not work on snow, ice or other slippery ground – slip hazard.
• Do not work under insufficient light conditions (e.g. fog, rain, snow flurry or
twilight).
• Scare animals off the hedge before starting to cut in order to prevent them from
being injured.
• Provide for a safe and cleaned workplace. Remove from the working area objects
which might be thrown off.
• Avoid abnormal posture. Keep your balance at all times. Do not work with the
upper part of the body leaned forward.
• Operate the hedge trimmer only with safe standing position.
• Stop the hedge trimmer when moving to another work place.
• Keep hands and feet away from the cutting device when it moves.
• Hold the hedge trimmer so that you do not inhale exhaust gases. Do not work in
closed rooms.
• Do not use the hedge trimmer to pick up or remove wood pieces or other objects.
• Remove unconditionally any foreign objects out of the hedge (e.g. wires) as these
can damage the knives of the hedge trimmer.
• Hold the hedge trimmer always firmly with both hands, left hand on the front
handhold and right hand on the rear handhold.
• The device will run for a short period after throttle trigger is released (free wheel-
ing effect).
• Start trimming with the cutting device moving.
• Never touch the cutting device with your hands during operation.
• Never work
- with stretched arms
- on hardly accessible places
- too far bent forward
• Never work with the hedge trimmer above shoulder height.
• Never allow the running cutting device to contact metallic fences or the ground.
• Stop the engine and pull the spark plug connector:
- when you notice changes in the device’s behaviour,
- to remove jammed material,
- to check the cutting device after it had contact with stones, nails or other hard
objects,
- to eliminate faults,
- for work breaks,
- before leaving the hedge trimmer.
AUS
HTH250/240P
Working instructions
AFTER SALES SUPPORT
21
1300 855 831
MODEL: HTH250/240P PRODUCT CODE: 59823 03/2018
