Layout/Scope of delivery
HTW250/240P
10
AFTER SALES SUPPORT
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
Vibration front handle a
hv
8.2 m/s²
Vibration rear handle a
hv
5.6 m/s²
Uncertainty K
hv
1.5 m/s²
XI. STORAGE
m
CAUTION
Never put the equipment into storage for longer than 30 days without carrying out
the following steps.
If you intend to store the equipment for longer than 30 days, it must be
prepared accordingly.
Otherwise the fuel still remaining in the carburettor will
evaporate and leave a rubbery sediment. This can cause problems when starting up
the equipment and may require expensive repairs.
1. Slowly remove the fuel tank cap to release any pressure that may have formed
in the tank. Carefully empty the tank of fuel.
2. To remove the fuel from the carburettor, start the engine and let it run until the
equipment stops.
3. Leave the engine to cool (approx. 5 minutes).
4. Remove the spark plug. You will need the supplied combined spark plug
wrench/screwdriver.
5. Add one teaspoon of 2-stroke engine oil into the combustion chamber.
6. Slowly pull the starter cord several times to apply a layer of oil to all internal
parts. Refit the spark plug.
Putting the equipment back into operation
1. Remove the spark plug.
2. Quickly tug on the starter line to remove excess oil from the combustion
chamber.
3. Clean the spark plug and check that the electrode gap is correct, or insert a new
spark plug with the correct electrode gap.
4. Prepare the equipment for operation.
5. Fill the fuel tank with the relevant mixture of fuel and oil.
6. Top up the chain oil in the chain oil tank.
AUS
Technical data/Storage
HTH250/240P
28
AFTER SALES SUPPORT
1300 855 831
MODEL: HTH250/240P PRODUCT CODE: 59823 03/2018
