S
U
A
1800 909 909
www.globalpowerbrands.com email: [email protected]
AFTER SALES SUPPORT
43671
13
Filling the tank
WARNING.
Always shut off the engine before fuelling. Never add fuel to a
machine with a running or hot engine. Move at least 9 m (30 ft.) away from the
refuelling site before starting engine. Do not smoke when refuelling or operating
the hedge trimmer.
Note.
It is normal for smoke to be emitted from a new engine during and after
first use.
1. Place the hedge trimmer upright on the ground or on a sturdy bench and wipe
any debris from around the fuel cap.
2. Unscrew the fuel tank cap and pour the mixture into the tank with the aid of
a funnel.
3. Be careful not to spill any mixture. If this happens, wipe the spill with a
clean rag.
4. Start the engine at least nine metres (30ft) away from the area where the fuel
tank has been filled up in order to avoid any risk of fire.
• Always use extreme care when handling fuel! Fuel is highly flammable.
• Never attempt to fuel the hedge trimmer if the fuel system components are
damaged or are leaking.
• Never attempt the refuel the engine while it is running or still warm, allow it to
cool before fuelling.
• Never smoke or light any fires near the hedge trimmer or fuels.
• Always transport and store fuels in an approved container.
• Never place flammable material close to the engine muffler.
• Never operate the hedge trimmer unless it is properly assembled and in good
working condition.
• Do not use petrol which contains ethanol or methanol as it may damage the fuel
lines and other engine parts.
• Mix only enough fuel for your immediate needs. Do not store pre-mixed fuel.
Fuel and Lubrication
