Gardenline 06/14, Руководство пользователя

Страница: 22 / 37

21
www.coreservice.co.uk AFTER SALES SUPPORT
IRE GB
0845 872 2740
019022605 GPCS46Z, 06/14, 52579
Stopping the engine
1. Release the throttle lever to allow the engine to idle for a few
seconds.
2. Set the switch to the “STOP” position. (FIG 19)
Important: Do not put the chainsaw on the ground when it is still
running. For additional safety, Switch the chainsaw off when not
in use or between cuts. In the event that the ignition switch will
not stop the saw, pull the choke control out and engage the chain
brake to stop the engine. If the ignition switch does not stop the
saw when set to the "STOP" position, have the ignition switch
repaired before using the chainsaw again to prevent unsafe
conditions or serious injury.
Note: When you have finished using the saw, always relieve the
tank pressure by loosening, then retightening, the chain oil and
fuel mix caps. Allow the engine to cool before storing.
switch
FIG 19