manualshive.com logo in svg

Gardenline 06/14, Руководство пользователя

Поделиться
Скачать
Gardenline 06/14 Скачать руководство пользователя страница 17

16

www.coreservice.co.uk

AFTER SALES SUPPORT

IRE

GB

0845 872 2740

019022605

GPCS46Z, 06/14, 52579

Important: The fuel mix is added into fuel tank(11), chain 
lubrication oil is filled into oil tank(10).Seal one cap prior to 
removing the second cap. If you put the fluid into the wrong tank 
seek assistance from an expert immediately.

Fueling the unit

1.  Untwist and remove the fuel cap. 
2.  Put fuel into the fuel tank to 80% of the full capacity.
3.  Fasten the fuel cap securely and wipe up any fuel spillage 

around the unit.

Important: Select bare ground for fuelling.
Important: Move at least 10 feet (3 meters) away from the fuelling 
point before starting the engine.
Important: Stop the engine before refuelling the unit. At the same 
time, be sure to sufficiently agitate the mixed fuel in the container.

Engine pre-start checks

Warning: Never start or operate the saw unless the bar and chain 
are properly installed.
1.  Ensure the correct fuel mixture is put into the fuel tank (11)
2.  Ensure the oil tank reservoir (10) is topped up with chainsaw 

chain oil

3.  Be certain the chain brake is engaged before starting the unit

Once you have filled the fuel and oil reservior, tighten each filler 
cap securely by hand. Do not use any tools to do so.

Содержание 06/14






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды