Gardenline 06/14, Руководство пользователя

Страница: 16 / 37

15
www.coreservice.co.uk AFTER SALES SUPPORT
IRE GB
0845 872 2740
019022605 GPCS46Z, 06/14, 52579
Mixing fuel (FIG 10)
Mix fuel with 2 stroke oil in the supplied container. Firstly fill the
large chamber of the mixing bottle up to a mark of your choice
(2.5 / 5) then add 2 stroke oil into the smaller chamber to the
corresponding mark. Shake gently to ensure a thorough mix.
Warning: Never use neat fuel in your unit. This will cause
permanent engine damage and void the manufacturer’s warranty
for the product. Never use a fuel mixture that has been stored for
over 90 days.
Warning: If 2-stroke lubricant is to be used, it must be premium
grade oil for 2-stroke air cooled engines mixed at a 40:1 ratio. Do
not use any 2-stroke oil product with a recommended mixing ratio
of 100:1. If insufficient lubrication is the cause of engine damage,
it voids the manufacturer’s engine warranty.
Recommended fuels
Some conventional fuels are being blended with oxygenates such
as alcohol or an ether compound to meet clean air standards. Your
engine is designed to operate satisfactorily on any fuel intended
for automotive use including oxygenated fuel. It is recommended
to use unleaded petrol as fuel.
Lubrication of chain and chain bar
Whenever you refill the fuel tank with petrol you must also top
up the level of chain oil in the chain oil tank.
Use special chainsaw oil to lubricate the saw chain.
Note: most stores will sell acceptable oil under the name “Chainsaw
chain oil”
Note: Do not use wasted or regenerated oil that can cause
damage to the oil pump.
FIG 11
FIG 10
11
10
40:1
2.5
5
2.5
5