10
tie straps just touch the bottom of the chain bar rail. Turning clockwise
tightens the chain tension. Then check the chain for smooth rotation
and proper tension while moving it by hand (wear gloves). If necessary,
readjust the chain tightening ring (but loosen the bar cover first).
6.
Hold the tip of the bar up and tighten the cover nut securely.
7.
Chain is correctly tightened when there is no slack on the underside of
the bar, the chain is snug, but it can be turned by hand without binding.
During normal operation, the temperature of the chain will increase. The
drive links of a correctly tightened warm chain will hang
approximately .050 in. out of the bar groove.
NOTE:
If chain is too tight, it will not rotate. Turn adjusting chain tightening ring
anticlockwise.
Assembling the shoulder strap
Always operate using the shoulder strap provided . Failure to do so could
result in loss of balance and result in personal injury
Place the shoulder strap so that it runs over the left shoulder, crossing the
chest and back.
Adjust the position of the securing clip loosening the strap position lock
nut(6) anticlockwise and sliding it into required position.
This unit is designed with a quick-release strap hook, pulling the bar-shaped
