14
Storing the chainsaw
Clean all foreign material from the product. Store idle unit indoors in a dry
and well-ventilated area that is inaccessible to children. Keep away from
corrosive agents such as garden chemicals and de-icing salts.
Always place the scabbard on the saw bar when transporting or storing the
pole chain saw. The scabbard is a snug fit and must be attached very
carefully due to the sharp teeth on the saw chain. This is best done by
grasping the scabbard at one end, in the centre portion of the scabbard,
and carefully sliding it over the chain as shown. Use caution to avoid the
sharp teeth of the chain.
NOTE:
The saw chain is very sharp. Always wear protective gloves when
handling the chain.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
REMEDY
Bar and chain
running hot
and smoking.
Check chain tension for
over tightened condition
Bar lube reservoir empty.
Tension chain. Refer to
Chain
Tension
earlier in this manual.
Check bar lube reservoir.
Motor runs, but
chain is not
rotating.
Chain tension too tight.
Check guide bar
and chain assembly.
Check guide bar and
chain for damage.
Retention chain. Refer to
Chain Tension
earlier in this
manual.
Refer to
Replacing the Bar
and Chain
earlier in this
manual.
Inspect guide bar and chain
Cleaning and maintenance
•
Remove the battery pack from the tool before carrying out any
adjustments, service or maintenance.
•
Your tool requires no additional lubrication or maintenance.
•
There are no user serviceable parts in your tool.
•
Never use water or chemical cleaners to clean your tool, wipe clean
with a dry cloth always.
•
Store your tool in a dry place, keep the motor ventilation slots clean
keep all working controls from of dust.
