12
1.
Remove oil tank cover.
2.
Carefully pour the bar and chain Lubricant oil into the tank.
3.
Wipe off excess oil.
4.
Check and fill the oil tank when quick view oil indicator is below the MAX
indicator line.
5.
Repeat as needed.
NOTE:
It is normal for oil to seep from the saw when not in use. To prevent
seepage, empty the oil tank after each use then run for one minute. When
storing the unit for a long period of time (three months or longer) be sure the
chain is lightly lubricated; this will prevent rust on the chain and bar sprocket.
Inserting the battery pack
Please insert the battery pack to the machine. Always use the correct battery
pack.
Operating the chainsaw
1.
Wear non-slip gloves for maximum grip and protection.
2.
Maintain a proper grip on the unit whenever the motor is running. Use
your right hand to firmly grip the rear handle while your left hand has a
firm grip on the pole shaft.
3.
Hold unit firmly with both hands. Always keep your left hand on the pole
shaft and your right hand on the rear handle, so your body is to the left of
the chain line. Never use a left-handed grip, or any stance that places
your body or arm across the chain line.
4.
Never stand directly under the limb you are cutting.
5.
Be certain the trigger(8 &9) are fully tightened before operating
equipment; check them periodically for tightness during use to avoid
serious injury.
6.
Remove the scabbard(25) from the blade before operation. To turn on
the machine, you should first push the switch lock button(4) and then
press the switch handle(3). Release the switch-handle will make the
machine stop.
