OP6: MD=2, IP=0, GT=-, DL=100.00ms, PL=100.00ms, RT= 0.00ms, iogefrp
OP7: MD=2, IP=0, GT=-, DL=200.00ms, PL=100.00ms, RT= 0.00ms, iogefrp
OP8: MD=2, IP=0, GT=-, DL=300.00ms, PL=100.00ms, RT= 0.00ms, iogefrp
Enable Ethernet Messages
GTm
m
= 0 to disable Ethernet messages
= 1 to enable Ethernet messages
When Ethernet messages are enabled, any trigger tag messages and error reports are sent to the
most recent UDP or TCP address from which a command has been received.
Read any Error Messages
GR
If Ethernet messages are not enabled, the last error number can be read by this command. The
reply is of the form:
Err 45
Error 45 was the last error
Err 0
No error has occurred since the last GR command
Set/Clear the Webpage Password
EY
EY asc1, asc2, asc3, asc4, asc5, asc6
This command sets the password required to access the webpages. If EY is entered on its own
then the password is cleared. There are six optional parameters, which are ASCII values for a
password from one to six letters. A value of 65 is ‘A’, 66 is ‘B’, etc to 90 is ‘Z’.
Set Pass/Fail
SNc,t,p
c
which output channel (1 to 8)
t
the trigger tag number
p
1 = pass, 0 = fail
For Resync mode, this command returned the pass/fail state of image processing for the given
trigger tag.
For example:
SN3,76,1 Output 3, trigger tag 76 is a pass
Set the output mode
RSc,m,i,g,f
c
which output channel (1 to 8)
m
mode
i
which trigger input: 0 for free running timer
1 to 8 for IP1 to IP8
9 to 16 for OP1 to OP8
g
which gate input:
0 for none
1 to 8 for IP1 to IP8
9 to 16 for OP1 to OP8
f
flags
