7.3.2
Setting Up Encoder Mode
Set the encoder mode from the keypad as follows. Press and hold the SEL button until the
display shows “OP1”. Use the UP and DOWN buttons to select “Enc” then press SEL. Select the
encoder mode using UP and DOWN and press SEL.
Enc
UP/DOWN
SEL
non
End
Press and
hold SEL for
1 second.
Then use
UP/DOWN to
select “Enc”,
then press
SEL
Select
encoder mode
and then
press SEL
n 1
UP/DOWN
n 2
SEL
7.3.3
Setting Up The Free Running Timer
Set the free running timer period from the keypad as follows. Press and hold the SEL button until
the display shows “OP1”. Use the UP and DOWN buttons to select “FrE” then press SEL. Set
the free running timer period. See section 7.3.1 for a description of how to set the time period.
FrE
SEL
End
Press and
hold SEL for
1 second.
Then use
UP/DOWN to
select “FrE”,
then press
SEL
Set up free
running timer
period as in
Section 7.3.1
7.3.4
Setting Up An Output Channel
The overall structure for setting up an output channel is given below. Configuration mode must be entered
once for each output channel to be set up.
The output mode names are given in Section 6. Depending on the selected mode, the user is prompted to enter
a time or a number of encoder pulses as appropriate for the pulse delay and pulse width.
The flag names are given in Section 6. A minus (“-“) sign indicates that the flag is not set. So “F-I” indicates
that the I flag is not set and “F I” indicates that it is set.
