TRENCHER
TZ S
Use and maintenance instructions – Spare parts Via L.da Vinci,32/B
Rev. 01.2013 - EN (translation of the original instructions)
67
36034 Malo (VI) Italy
T E Z A
BEFORE PERFORMING ANY MAINTENANCE WORK, TURN OFF THE MACHINE (SEE PARA
2.2.2).
FOR ANY EXTRAORDINARY WORK, REQUEST AUTHORISATION FROM THE MANUFACTURER
AND/OR THE TECHNICAL ASSISTANCE SERVICE.
MAKE SURE TO REMOUNT THE DISMOUNTED COMPONENTS CORRECTLY.
IT IS STRICTLY FORBIDDEN TO DISCHARGE LUBRICANTS AND OTHER FLUIDS INTO THE
ENVIRONMENT.
THESE POLLUTANT AND HAZARDOUS PRODUCTS MUST BE DISPOSED OF BY SENDING THEM TO
AUTHORISED SPECIALIST COMPANIES FOR THE VARIOUS PRODUCT TYPOLOGIES IN TOTAL
COMPLIANCE WITH THE LEGISLATION IN FORCE IN THE COUNTRY OF USE OF THE MACHINE.
ALL THE COMPONENTS OF THE MACHINE MUST BE IDENTIFIED ACCORDING TO THE “EWC CODES”
(EUROPEAN WASTE CATALOGUE) AND DISPOSED OF BY AUTHORISED SPECIALISED COMPANIES IN
TOTAL COMPLIANCE WITH THE REGULATIONS IN FORCE IN THE COUNTRY OF DEMOLITION.
8.2- EXTRAORDINARY MAINTENANCE
This is the set of activities performed in order to maintain the conditions of use and operation of the
machine, by means of various types of activities (cleaning, adjustments, replacements, etc.) exclusively
performed by the manufacturer or in case of failure or wear.
9- DEMOLITION
9.1- GENERAL WARNINGS
When demolishing the machine, comply with the regulations in force in the country of demolition.
10- ATTACHMENTS
10.1- INSTRUCTIONS FOR LIFTING THE MACHINE
These comprise an A4 (210 x 297 mm) sheet of paper, printed in b/w (waterproof), applied to the
machine (see FIG. 11).
