Use and maintenance manual
Rev. 02/18 - UK
Via Leonardo da Vinci, 32/B
36034 Malo (VI) Italia
11
TZ OPTIC FIBER 400 INNOMINABILE
the operator. The machine must not be if it is not
safe or in poor operating conditions. Always per-
form a preliminary inspection of the machine befo-
re using it.
- The user agrees to entrust the machine exclusi-
vely to qualified personnel who have been trained
for the purpose.
- It is forbidden for anyone to drive or operate the
machine if they have not read and assimilated the
contents of this manual, including incompetent
staff, who are not in good physical and mental he-
alth and who are under the age of 18 years.
- It is the user’s responsibility to take all appropria-
te measures to prevent unauthorized people from
using the machine.
- The user agrees to adequately inform staff with
regard to the application and compliance of safety
requirements.
- The user must inform the Manufacturer in the e-
vent he uncovers defects or malfunctions in the
safety systems or of any situation where there is
alleged danger.
- The operator must use the individual means of
protection under the law and follow the instructions
in this manual at all times.
- The operator must abide by all the danger and
caution markings on the machine.
- The operator should not perform any intervention
or operation under his own initiative that is not his
responsibility.
- The machine has only been tested with the stan-
dard package. The assembly of parts from other
manufacturers or any changes can alter the cha-
racteristics of the machine and thus impair the o-
perational safety.
Use original spare parts at all times.
- The machine must not be operated with guards
removed or if it is partially damaged.
- The machine should not be operated in enclosed
environments or if there is a risk of explosion or
fire.
- The machine can only be operated in daylight
hours.
- Operations and adjustments on the machine
must always be performed when the machine is
idle with the engine switched off.
- IT IS STRICTLY FORBIDDEN TO LEAVE OR
ABANDON THE MACHINE WHILE THE ENGINE
IS RUNNING.
- Before commencing any work, check for un-
derground power cables, pipelines or other ha-
zards in the excavation area.
- Wear suitable clothing. Avoid wearing loose clo-
thing which could catch in the moving parts. Long
hair should be tied up. The operator should also
avoid carrying sharp tools in his pockets.
- During maintenance and repair the use of protec-
tive clothing, safety gloves, sturdy shoes and crush
is required.
- Before starting the machine, check the integrity of
all the safety devices.
- Before starting work for the first time, familiarize
yourself with the controls and their functions.
- The area in which the machine is used is to be
considered a ‘danger zone’, especially for those
not trained in its use.
- Before starting the machine, check that all around
the work area there are no persons or animals or
obstructions of any kind.
- When a person is exposed to danger, that he is in
the «Danger zone», the operator must immediately
intervene by stopping the machine and removing
the person in question.
- Should the protective casings be removed, plea-
se ensure that they are correctly restored before
using the machine.
- Observe the conformity of recommended oils.
Keep lubricants outside of the reach of children.
Carefully read the instructions and safety warnings
on the lubricant containers. Wash thoroughly after
use.
- Once maintenance and repairs are complete and
before restarting the machine, make sure that the
work is completed, that the safety devices have
been reactivated and that the guards have been
replaced.
- When working on soft ground, near drop-offs, di-
tches or slopes proceed with caution to avoid any
tilting of the machine.
- Never touch parts whilst in movement or place
things between them (especially the toothed disc)
maintaining a safe distance.
