Gap Diagnostic IIDTool Pro G3 Скачать руководство пользователя страница 42

Страница: 42 / 188

IIDT

ool

User Manual G3 units: Version 37, Firmware V4.0

2.5 Updating the IIDTool firmware

Purpose

Keep the IIDTool up to date.

Principle

Updates are made by reflashing the firmware.

Note :

The backed up data stored in memory will not be affected by the update.

Benefits of updating the IIDTool

• Take advantage of bug fixes (if any)

• Take advantage of operational improvements such as execution speed... and more

• New additions in the tool and application

Prerequisites

• Having access to a PC or Mac type personal computer connected to an Internet service

• Having registered on the website (

section 2.2

)

• Having completed installation of the updater software (

section 2.3

)

• Having completed the mobile App installation or update (

section 2.4

)

2.5.1 Steps for updating the IIDTool

1- Connect the tool to the USB port of the computer using the supplied USB cable

2- Start the updater software previously installed in the computer

3- Click on “ FIND DEVICE ” and wait until pairing of the tool with the updater software is comple

ted. Once paired, the user information, vehicle information and current firmware version of the

tool will be displayed.

4- Select the desired version of the firmware in the right combo or radio box (if available)*.

5- Click on “ PROGRAM FIRMWARE ”. The evolution of each data file is observable in succession

on the progress bar.

6- A subsequent window will appear with “ACTION NEEDED”. The requested operation is syn

chronization of the mobile App with the tool. Keep the tool connected to the computer to com

plete this step described in section,

section 2.6.

Note:

Performing synchronization immediately

after updating the tool or before first usage will prevent prolong file loading when connected to

the vehicle due to a poor Internet connection.

* The normal version is named RELEASE.CUSTOM version is for updating ECUs when a fast lane is

purchased. SPECIAL is for other language or other.

Содержание IIDTool Pro G3


























































































































































































Результаты поиска

Содержание IIDTool Pro G3

Отзывы:

Бренды по названию

Популярные бренды

Gap Diagnostic IIDTool Pro G3, Руководство пользователя

Результаты поиска

Содержание IIDTool Pro G3

Отзывы:

Бренды по названию

Популярные бренды