Gap Diagnostic IIDTool Pro G3 Скачать руководство пользователя страница 45

Страница: 45 / 188

IIDT

ool

User Manual G3 units : Version 37, Firmware V4.0

2.6 Synchronizing the Mobile Application

Purpose

Refresh files in the Mobile Application IIDControl to achieve consistency with the firmware of the newly

updated tool (

section 2.5

) or prior to first usage.

Note:

Performing synchronization immediately after updating the tool or before first usage will prevent

prolong file loading when connected to the vehicle due to a poor Internet connection.

Prerequisites

• Having access to a PC or Mac personal computer. A USB power source is not sufficient, a com

puter is mandatory.

• Own a compatible mobile device (

section 1.7.3

) connected on the Internet.

• The IIDControl App is installed and up-to-date (

section 2.4

)

• The IIDTool firmware was updated (

section 2.5

) or a new mobile device is used with the tool for

the first time.

Steps

1- Connect the IIDTool on the USB port of the computer.

2- Launch the mobile Application IIDControl in the mobile device.

3- Click on “ Search for tool ”.

4- Select the tool in “ Bootloader ”. For the first synchronization, fill the required fields.

5- Wait while all data files are downloaded : the word “ Loaded ” indicates completion.

6- Exit the application by pressing “Disconnect”.

7- Repeat previous steps for each mobile devices that may be used with the tool.

8- Unplug the IIDTool from the computer or USB supply.

Содержание IIDTool Pro G3


























































































































































































Результаты поиска

Содержание IIDTool Pro G3

Отзывы:

Бренды по названию

Популярные бренды

Gap Diagnostic IIDTool Pro G3, Руководство пользователя

Результаты поиска

Содержание IIDTool Pro G3

Отзывы:

Бренды по названию

Популярные бренды