BG9008W User Manual
Page 60 of 133
Figure 3-86 Configure IPv4 Static Route
The following items are displayed on this screen:
►
Enable:
Select it to add and modify the current route. Conversely, disable the current
route.
►
Destination IP:
Enter the destination host the route leads to.
►
Netmask:
Enter
the Subnet mask of the destination network.
►
Next Hop Type:
Include
Next Hop Interface
and
Next Hop Address
(see following option)
►
Next Hop Interface:
Specify the interface of next hop for current route
►
Next Hop Address:
Specify the address of next hop for current route
►
Valid:
Show the status of current route.
3.4.8.1.2 IPv6
The menu IPV6 is hidden if you don’t enable Ipv6 stack, please refer to configuration index
Network
→
IPv6
for detail setting.
Choose the menu
Data Service
→
Route
→
Static Route
→
IPv6
to load the following page.
Figure 3-87 Configure IPv6 Static Route
The configuration options of Ipv6 is similar to Ipv4, the prefix length is equal to mask of Ipv4 address.