![Gaoke BG9008W Скачать руководство пользователя страница 28](http://html1.mh-extra.com/html/gaoke/bg9008w/bg9008w_user-manual_3411487028.webp)
BG9008W User Manual
Page 17 of 133
The following items are displayed on this part.
►
LAN Isolate:
Check the box to prohibit the access between LAN interfaces.
►
Auto Bridge:
Check the box to dynamically create IPTV bridge for STB.
►
DHCP Vendor ID:
Vendor class identifier List (DHCP 60 option), support at most two vendor IDs.
►
IPAddress:
IP address of interface for STB data service.
►
Netmask:
Subnet mask of interface for STB data service.
►
VID:
VID of IPTV VLAN.
►
PRI:
Priority level of IPTV VLAN.
►
Automatic:
Check the box to automatically detect the VID of STB data service.
3.3.4 WLAN
Wi-Fi
is a
WLAN
(Wireless Local Area Network) technology. It provides short-range wireless high-speed
data connections between mobile data devices (such as laptops, PDAs or phones) and nearby Wi-Fi
access points (special hardware connected to a wired network).
3.3.4.1 Basic
Settings
Choose the menu
Network
→
WLAN
→
Basic Settings
to load the following page.
Figure 3-14 Configure WIFI Basic Settings
The following items are displayed on this screen:
►
Enable WiFi:
Enable or disable the WIFI AP function globally.
►
Channel:
This field determines which operating frequency will be used. The default channel is
set to
AutoSelect
, so the AP will choose the best channel automatically. It is not
necessary to change the wireless channel unless you notice interference problems
with another nearby access point.
►
Wireless Mode:
Select the desired mode.
11b:
Select if all of your wireless clients are 802.11b.
11g:
Select if all of your wireless clients are 802.11g.
11n:
Select only if all of your wireless clients are 802.11n.
11b/g:
Select if you are using both 802.11b and 802.11g wireless clients.
11b/g/n:
Select if you are using a mix of 802.11b, 11g and 11n wireless clients.
►
Channel Width:
Select any channel width from the drop-down list. The default setting is automatic,