![Gaoke BG9008W Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/gaoke/bg9008w/bg9008w_user-manual_3411487027.webp)
BG9008W User Manual
Page 16 of 133
The following items are displayed on this part.
►
Interface Name:
Name of this LAN interface.
►
IP Address:
Enter the IP address for this LAN interface.
►
Netmask:
Enter the subnet mask for this LAN interface.
►
NAT:
Optional Enable or disable NAT for
this LAN interface
►
Assign NAT IP:
Optional If NAT is selected. NAT IP address can be assigned.
►
Enable DHCP Server:
Enable or disable DHCP server on this LAN interface.
►
Start IP:
If
Enable DHCP Server
is selected, enter the Start IP address to define a
range for the DHCP server to assign dynamic IP addresses. This address
should be in the same IP address subnet with the IP address of this LAN
interface.
►
End IP:
If
Enable DHCP Server
is selected, enter the End IP address to define a
range for the DHCP server to assign dynamic IP addresses. This address
should be in the same IP address subnet with the IP address of this LAN
interface.
►
Netmask:
If
Enable DHCP Server
is selected, enter the
Netmask
to define a range for
the DHCP server to assign dynamic IP addresses.
►
Gateway:
Optional .If
Enable DHCP Server
is selected, enter the Gateway address to
be assigned.
►
Primary DNS:
Optional. If
Enable DHCP Server
is selected, enter the Primary DNS server
address to be assigned.
►
Secondary DNS:
Optional. If
Enable DHCP Server
is selected, enter the Secondary DNS
server address to be assigned.
►
Lease Time(Second):
If
Enable DHCP Server
is selected, specify the length of time the DHCP
server will reserve the IP address for each client. After the IP address
expired, the client will be automatically assigned a new one.
Advanced Parameter
►
LAN Port:
Select the physical LAN port to bind the IP address of this LAN interface.
►
WAN Subinterface:
Select the WAN subinterface which the packet from this LAN interface can
be sending to.
2) Part 2: Configure LAN Route/Bridge mode
The following items are displayed on this part.
►
Port:
The physical LAN port name (LAN1~LAN4).
►
Route/Bridge:
Mode of this physical LAN port. The following four modes are provided:
Route:
route to WAN
Transparent bridge:
not modify the packets;
Tagged bridge:
LAN untagged, WAN tagged; only 1 VID supported
Promisc Mode:
Tagged packets in bridge mode, untagged packets in route mode;
most 5 VIDs supported (e.g. 8, 10, 13).
►
VLAN ID List:
If Tagged bridge/Promisc Mode is selected, configure the VID/VIDs.
3) Part 3: Configure IPTV
Choose the menu
Network
→
LAN
→
Advanced Parameters
to load this page.