![Gaoke BG9008W Скачать руководство пользователя страница 70](http://html1.mh-extra.com/html/gaoke/bg9008w/bg9008w_user-manual_3411487070.webp)
BG9008W User Manual
Page 59 of 133
Figure 3-85 Add or Modify IPSEC Safety Policy Entry
The following items are displayed on this screen:
►
Enable Ipsec:
Enable or disable this IPSEC entry.
►
IPSEC Policy Name:
Specify a unique name to the IPSEC policy.
►
Select Interface:
Specify the local WAN port for this Policy.
►
VPN Mode:
Select the network mode for IPSEC policy. Options include:
Site To Site:
Select this option when the client is a network.
PC to Site:
Select this option when the client is a host.
►
Local Subnet IP & Local Subnet Netmask:
Specify IP address range on your local LAN to identify
which PCs on your LAN are covered by this policy.
►
Remote Address:
If
PC to Site
is selected, specify IP address on your remote network to
identify which PCs on the remote network are covered by this policy.
►
Remote Subnet IP & Remote Subnet Netmask:
Specify IP address range on your remote network to
identify which PCs on the remote network are covered by this policy.
►
IKE Safety Policy:
Specify the IKE policy. If there is no policy selection, add new policy on
VPN
→
IPSec
→
IKE Safety Policy
page.
►
Enable Safety Prososal: If enabled,
Select IPSEC Proposal. If there is no policy selection, add new
IPSEC proposal on
VPN
→
IPSec
→
IPSEC Safety Proposal
page. Up to
four IPSEC Proposals can be selected.
3.4.8 Routing
3.4.8.1 Static
Route
3.4.8.1.1 IPv4
Choose the menu
Data Service
→
Routing
→
Static Route
→
IPv4
to load the following page.