PixelMASTER GXi Series NVR
User’s Manual
05-2014-A
6
6
1.1.1.2 Preparing new F/W in the USB thumb driver
1) Unzip firmware file.
After unzip, you can see above system file.
According to Upgrade field, number of downloaded file would be different.
2)
Make the ‘dvr’ folder at the root of the USB thumb drive.
The characters, ‘d’,’v’,’r’, in the folder name have to be a lower case not a capital.
3) Copy the released F/W zip file into the
‘dvr’ folder in the USB thumb drive.
1.1.1.3 Upgrading System from the System Menu
Following steps will guide you into the way to upgrade the system with the new F/W.
1) Plug the prepared USB thumb drive in the USB port of NVR.
2) Open Setup=>SYSTEM=>MANAGEMENT menu.
3) Press
‘UPGRADE’ button.
The whole upgrading process may take about ten minutes.
DO NOT remove the USB thumb driver during upgrading.
DO NOT turn off power of system during upgrading.
4) If the firmware upgrade is finished, system will be rebooted automatically.
