PixelMASTER GXi Series NVR
User’s Manual
05-2014-A
45
45
F/W UPGRADE: Use this button to upgrade Firmware.
fiCopy new Firmware files in
“dvr” folder of USB memory stick.
Connect USB memory to NVR, then click F/W UPGRADE button.
FACTORY DEFAULT: Set all settings to factory default.
SYSTEM DATA: You can save/load System settings to/from USB memory stick.
VIDEO OUTPUT: You can select Video Signal type for CVBS output.
If you change the video signal, system rebooting is required.
AUTO LOGIN (PASSWORD)
: Selects if a password is required ‘ON / OFF’.
Note) Password must be selected to ‘ON’ if USER MANGEMENT options are required.
MAKE RESCUE DISK: You can make the recovery file when NVR has problem to
start up.
How to Create a Recovery Disc
Plug the prepared USB thumb drive in the USB port of NVR.
Click the ‘create’
How to recover
Disconnect the HDD disk of NVR
Plug the prepared USB thumb drive in the USB port of NVR.
Turn on the NVR. NVR will load the system from recovery disk.
6.4.3 SOUND
LIVE AUDIO: If you select
“on”, Audio output is available at live mode.
DEFAULT AUDIO CHANNEL: Specify which channel of the AUDIO INPUTS is routed to
the AUDIO OUTPUT when the NVR is in multi-screen mode.
KEYPRESS: This setting will turn the IR Remote confirmation beep on or off.
