PixelMASTER GXi Series NVR
User’s Manual
05-2014-A
26
26
VCA function supported only for PixelPro GXi camera with auto connection mode.
STATUS (VA only) : Display VA event
’s “begin” or “end”.
ZONE (VA only) : Display zone number of VA event.
VALUE (VA only) : In VA event, display event information requiring value.
NAME (VA only) : Display registered name of VA event
4: You can select Event Type will be displayed in Event list.
ALL: Display all events.
SENSOR: Display Sensor Event.
VIDEO LOSS: Display Video loss Event.
MOTION DETECTION: Display Motion Event.
VCA: Display VCA Event (Available for PixelPro GXi camera).
5. VCA set up in detail: Search condition of VCA event set up in detail.
1 : TYPE : You can select which Type of VA will be displayed in VA list.
2 : STATUS : You can select start/end time of VA events.
3 : ZONE : You can select the zone of VA events.
4 : INEQUALITY : You can select the range of the value of VA events.
5 : VALUE : You can select the value of VA events.
6 : NAME : You can input ID of VA events which is " Object classifier" possible..
6:
Search for events by hours / minutes can be selected.
: Event search by hour
: Event search by minute
7: You can select channel which will be displayed in Event list.
8: Switch Events List page. A total 500 events are shown on page 25.
9 : You can configure a search condition again by stepping above 4 ~ 7.
