Copyright © Ganterud Lifting Solutions AB | www.ganterud.se | [email protected]
15
4.2.1 Preparations
• Load control must be performed by the responsible operator. Max. load 3 tonnes.
• Plan the lift and perform a risk analysis (see applicable local regulations and working instructions).
• Make sure that daily inspection is performed (see “Daily inspection” under section 4.1).
• Make sure that the lifting yoke is free from damage that could jeopardise safety.
• Check that the battery charger on the lifting yoke is disconnected from the power source.
• Check that the lifting yoke’s hatch is closed.
4.2.2 Normal use
4.2 Operating the lifting yoke
When carrying a load, the lifting yoke must
be operated in slow mode!
When using the lifting yoke in certain
situations, noise and vibrations may occur in
the lifting yoke. This is entirely normal and is
caused by the transition between the chain
and the chain wheel.
Position Description
A xx
B xx
C
Radio transmitter / Handheld controller active
D
Fast mode active. (Do not use when the yoke is carrying a load)
E
Lower hook 1 (raises hook 2)
F
Lower hook 2 (raises hook 1)
G
On/Off
H
Activates fast mode
I xx
J
On/Off button for radio transmitter
